As a hot selling product of wearable products, silicone bracelets have always been favored by consumers. At present, the products on the market have different styles and effects, different shapes and colors for different consumers, etc. Of course, there are quality differences between different silicone bracelet suppliers. The problem of silicone bracelet size deformation has become a problem. Many consumers are puzzled by the deformation of large products!
The product deformation is aimed at the thin silicone bracelet. This phenomenon depends on self-protection. Although the silicone material is a soft product, the deformation phenomenon is closely related to the storage and use of the product itself, especially the impact of long-term twists and turns, no rebound after stretching, placing in a harsh environment and other factors! Therefore, you should wear and use them properly!
On the other hand, the most important is the quality of the process and materials. Many manufacturers make goods in different ways and processes, resulting in changes in the overall brittleness and elasticity of products. So the premise is to use good materials to make high-quality silicone bracelet. In terms of technology, reasonable curing time should be matched. Time and temperature should not be reduced or increased due to the rush of production capacity, which often leads to product deformation and softening.
Many undesirable phenomena can be directly solved by solving the problem of stretching springback of raw materials. But the tensile strength and resilience of raw materials are two different properties, so the materials should have good tensile strength and resilience.
However, some materials have good tensile properties but will not rebound, so the stretching of products during production will naturally lead to greater deformation of products. However, products with good resilience may not have good tensile strength, and the use effect can not be well solved!
So to sum up, the customized processing of silicone bracelet should start with raw materials, what materials can be used to achieve the desired effect, and the processing technology should be fixed. The processing method cannot be changed at will to control the product performance!
